What should I pay attention to when using a twin-screw extruder?
During the use of the twin-screw extruder granulator, the operator must be familiar with all the precautions, and use it in strict accordance with the requirements of the operating procedures, and must not operate illegally. In addition, in order to ensure the reliability of the safety device, the protective measures on the equipment must not be removed for convenience, which should be paid special attention to.
During the operation, the raw materials that are about to enter the extruder also need to be carefully checked. If there is sand or metal in it, it must be picked out, so as to prevent the screw or barrel from aggravating wear and avoid jamming or damage. Case.
You need to preheat the twin-screw extruder, and the screw must not be rotated until the preheating does not reach the set temperature. If the heat preservation time is not enough, it must not be able to start the operation, which is very worthy of everyone's attention. For the operators of the plastic pellet machine, professional training is required to be able to work on the job. Only when they are familiar with the structure, performance and operating procedures of the plastic granulator can they use the plastic granulator in the correct way. In this way, to a certain extent, they can ensure that the plastic granulator will not have various failures during use. to be able to work normally.
Nanjing Tengda Machinery Co., Ltd. is the largest manufacturer of Application, which is one of the best product manufactured from us.
Nanjing Tengda Machinery Co., Ltd. is a professional manufacturer of offering some of the best in class Application solutions to global market. Click TENGDA Extruder Machine Manufacturers to learn more.
A quality monitoring group created for ensuring that Nanjing Tengda Machinery Co., Ltd. manufactures Application accoording the strictest standard.
extruder machine manufacturers Application may be adapted for use at any plastic extruder machine manufacturers and is suitable for extruder machine manufacturers.
